E GRIP II ™

E GRIP II ™
Floor adhesive.

This product has been discontinued.

features & benefits

improved trowelability–installers will experience less fatigue spreading E-Grip II
better consistency–mixing is no longer required
greater initial tack–improved tack helps keep the rubber flooring and seams flat and secure
simplified application–can be installed indoors using a standard 1/16 inch square notch trowel - each 4 gallon pail contains a free replaceable trowel blade
very low odor–no annoying vapors or smells
superior VOC performance–50% lover VOCs than the most demanding U.S. standard (SCAQMD Rule 1168)

product availability

physical data

Adhesive Type: One Component Polyurethane – Medium Gray Color

Adhesive Cure System: Moisture Cured

VOC Content: 0.29 lb/gal (or 34 g/L)

Freeze/Thaw: Stable

Application Temperature: 40° to 100°F

Moisture Vapor Emission of Concrete Subfloor: Maximum 5.5 lbs per 1000 sq ft in 24 hrs
(calcium chloride test – ASTM 1869)

Flashpoint: > 200°F

Shelf Life: 6 months

Working Time: 30 – 40 minutes

Trowel: 1/16 in. Square Notched Blade – (For indoor installation on concrete or plywood subfloors only.)

Coverage Rate: 95 sq ft per gallon (1/16 in. notched trowel)

Weight: 4 gallon pail – 58 lbs
2 gallon pail – 29 lbs

any questions?
call 1-800-558-2058

or